Omron PLC c200He cpu 42

ajay34

Member
A
Join Date
May 2010
Location
klang
Posts
249
hello sir ..

i have queestion to ask ..regarding omron plc units ,,

recently .i wanted to connect omron PLC unit (c200he to HMI)
which locate more than 5mtr between HMI and PLC..estimated about 15mtr long ..previosly this plc is not connected to PC or HMI..but now they wanted to connect to HMI ..

i would to know what is things i need to connect to PLC and HMI .r can i use
XW2Z-500S-V this cable to to connect?
🍻
 
15 metres is too far for an Rs232 serial connection - you will need RS232/485 converters.
 

Similar Topics

A
convert c200HE TO CQM OMRON PLC
Hello..all i have 1 project to upgrade C200HE to CQM1 omron plc ..need expert suggestion been told to change old model to CQM! model ..which i...
Replies
11
Views
3,745
BobB
BobB
A
omron c200he plc error..
hello all... i would like to ask help or suggestion on problem me facing on omron c200he plc.. i had mounted addtional output unit od215 to...
Replies
7
Views
1,795
ajay34
A
A
Omron PLC c200he
dear all... i would to know..does omron c200he plc..can be support by etthernet.. i wanna commnicate omron plc with wincc but using ethernet...
Replies
6
Views
2,801
BobB
BobB
J
OMRON C200HE PLC RS232 connection problem
Hi, I wish to connect to the OMRON C200HE PLC via its peripheral port, using omron's RS-232 interface adaptor. I have no ethernet module for...
Replies
0
Views
5,484
jeffso
J
M
Struggling to get good connectivity with Omron PLC (CS) and KeserverEx
Hi There, I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Replies
4
Views
131
Mihir_007
M
Back
Top Bottom