Point Bus Status in 1734 AENT Point IO.

Join Date
Jul 2015
Location
Kolkata
Posts
2
Some times in running condition of the PLC, the point bus status become solid red and network status blinking green due to that total system stops..... I ve checked all Ethernet connections also.....there is no problem but if i recycled the power of the PLC then it becomes healthy automatically... I have checked all possibilities mentioned in manual also.

Plz suggest what should I do?
 

Similar Topics

Hello all, I have a couple 1734-AENTR/C modules (revision 6.012) that are connected to a 1756-L73S (Revision 32.011). I have checked the...
Replies
4
Views
2,780
Hi all, I definitely know this is common problem and there are many threads about it and I did read them several time using "search" tool. Also...
Replies
11
Views
15,848
About every 5 minutes we are seeing both network and point bus status lights on our 1734-AENTR blink red simultaneously for about 30 seconds, then...
Replies
13
Views
1,267
Hi, I just bought a 1734-AENT Series C module (Revision 6.01). I am using RS logix5000 and at site we have a running system with control logix...
Replies
16
Views
8,623
Hi eveyone. I need transfer signal from system 1 to DCS via modbus. System 1 only can send 32 bit floating point. DCS receive 16 bit integer. How...
Replies
20
Views
10,431
Back
Top Bottom