S7-200 to S7-1200 tool

Dear All

i search for tool to convert microwin program to TIA V13
i think Siemens site remove it and make it not for free
anybody can help?

I dont think there was ever a migration tool for Micro/Win to TIA.
In TIA, only STEP and WinCC Flexible 2008 projects can be automatically migrated.

There was a converter tool available with TIA V10.5 and maybe V11
It was available from the file menu in TIA Basic.
It does not seem to exist in 13 ?

It required you to have MicroWin and TIA installed.

But there does not seem to be a stand alone converter.

If the OP has TIA basic 10.5 or 11 it should be there.

There is a link here to a file. I have not used it so i don't know if it is valid.

Is it what you are looking for?

https://support.industry.siemens.co...-conversion-program/39878/?page=0&pageSize=10

I went through this last December.
Only TIA 10.5 and 11.0 have the converter. Convert to 10.5, then use 13.0 to convert from 10.5 to 13.0.
Using MicroWin V4, SP9, I saved a copy of the program. Sent it to my Siemens distributor to do the conversion to 10.5.

Even with the converter, it's still a mess. You need to do so much cleanup, it's easier just to rewrite the whole thing.