I tried searching online, but don’t know if I was using the right terminology for what I'm looking to do. Basically what I have is an older cabinet on a line that has a SLC 5/05 rack in it with a bunch of I/O. I am adding onto to said production line, due to the size and fullness of the old cabinet, I will be adding another control cabinet with a L27ERM CompactLogix PLC. I will need to keep the original cabinet and I/O, but want to keep all of the logic together and just controlled out of one PLC. I am trying to figure out how to add the I/O of the 5/05 in the old cabinet into my CompactLogix PLC. I know there is a module that you can plug into older SLC racks to do this and pretty much turn the SLC rack into a RIO rack, but since I already have EtherNet on my 5/05, I was hoping I could just delete everything out of the 5/05, put my logic in the CompactLogix, and go through that instead. I tried looking in the “Module Type” list for EtherNet modules, but didn’t see anything for a 5/05 or SLC or anything of the sort in there? I know I can do all of this via sending and receiving message commands back and forth from the L27ERM to the 5/05, but was wondering if there was an EDS module or a better way to do this with a little more diagnostics?