ABB ACS800 control over Profinet (with RETA-02) from a S7-1515

bcg98001

Member
Join Date
Jan 2007
Location
Västerås
Posts
1
I am trying to control an ABB ACS800, with a RETA-02 com.card, over Profinet.

But without any luck! :(



The system i set up with a S7-1515-2PN who communicates with the Drive through a Scalance 200 switch.

I would like to use the Profidrive communication (if it is possible)

Is there anyone who has done this or have any tips.

If someone has a example project would be really nice! :)

I am using the Tia Portal V13.


Best regards
bcg
 
Benny
What do you have so far?
What telegram? It should be very close to Siemens drives using profidrive profile
Can you post your project somewhere?
 

Similar Topics

I am looking to trim the speed of an ABB ACS800 drive via an analogue input. That is the main reference comes into the drive via thye Profibus...
Replies
1
Views
3,492
Members of this forum helped me out a great deal a couple of years ago with a question I had regarding acceleration during torque control of...
Replies
8
Views
4,275
I am getting an AD1_PLACE1 fault on my drive and am stumped, any pointers would be appreciated!
Replies
3
Views
1,834
I am using a ACS800 regen drive to drive a 500hp motor for a engine dynomometer application. I am currently running the drive via ethercat...
Replies
0
Views
1,638
Hi All, We have a ABB ACS 800 Drive, Have 2 AO for RPM and current output. As default setting, both are available on X9-12 terminal. I am...
Replies
1
Views
2,138
Back
Top Bottom