NovaTech D3 question

FGB is a Function Generator Block.

If the input is X1, the output is Y1, etc.
If the input is between 2 successive X values, linear interpolation is used to assign the output.
 

Similar Topics

I was curious if anyone out there has any experience with the D/3 system? I really know very little about it. What type of programming language...
Replies
3
Views
3,123
Good morning crew! Ok my logic works but I am missing something. When the start button is pushed it should like the red light for 4sec then shut...
Replies
0
Views
1
Hey guys, the scenario is: I have already completed the drawing package for my system utilizing an A-B 440R-N23126 (Minotaur) safety relay. SoS...
Replies
0
Views
80
I'm looking for some clarification if anyone here is familiar with UL698a panels. Panel is out of zone/class'd area. with thermocouples extending...
Replies
0
Views
75
Hi all, So I continue to dabble in PLC's and for the most part can figure stuff out. I have been fortunate enough lately to have access to a...
Replies
3
Views
127
Back
Top Bottom