Siemens ET200iSP Input Voltage

Bretts

Member
Join Date
Jul 2011
Location
East London
Posts
1
Hi

Can anyone tell me if I can wire an external 24VDC signal from a pushbutton into a Siemens 8DI Namur input card (6ES7131-7RF00-0AB0).

The manual shows a dry contact wired from the cards 8V supply only.

Can anyone confirm this?

Regards
 

Similar Topics

Hi, I have a Siemens ET200iSP IM152-1 remote I/O module and it is connected via Profibus cable to a Siemens S7300 315-2DP PLC with three CP342-5...
Replies
0
Views
1,900
Hi everyone, I want to upload the program from my CPU317TF-2 DP to my PC via connecting to CP 343-1 Advanced since it has LAN ports and the CPU...
Replies
1
Views
87
Hello sameone have Beckhoff PLC Siemens Sinamics V90 configuration example?
Replies
0
Views
55
Buona sera, Ho dei problemi nell' interfacciare PLC S5 con HMI 2a Gen. Siemens (ad esempio KTP400) tramite IBH Link S5++. il mio obbiettivo è solo...
Replies
0
Views
46
Hey when I turn on my Siemens PLC CPU 216-2 after runing 10 minute it's stop and showing SF indication after I turn off and some time later turn...
Replies
0
Views
84
Back
Top Bottom