Need a wiring diagram for Entrelec relays
- Thread starter dogleg43
- Start date
danatomega
Lifetime Supporting Member
This PDF covers those units:
http://www.proidea.ro/abb-srl-22884..._2_1328188081719_abb_relee_optocuplatoare.pdf
looks like A1 & A2 are the coil with a built in diode bridge for polarity protection.
Pin 11 is the pole with pin 12 N.C. and 14 N.O.
The document is from ABB
http://www.proidea.ro/abb-srl-22884..._2_1328188081719_abb_relee_optocuplatoare.pdf
looks like A1 & A2 are the coil with a built in diode bridge for polarity protection.
Pin 11 is the pole with pin 12 N.C. and 14 N.O.
The document is from ABB
Perfect. Thank you very much.
Similar Topics
Im a mechatronics instructor at a local community college. I have a couple of motor control questions and would definitely appreciate any help...
https://imgur.com/a/kKPtzyP
We are making improvements to these motor controls by replacing these old resistor banks and DC generator with DC...
Hey guys, I have checked the square D wiring diagram e-book to no avail.
What I need is the wiring diagram to: E10296905-001.03-1
The number...
Hi, all.
I just got an Omron CPM2A off eBay and I need to make my own serial cable to connect it to my computer for programming. I will be...
I'm currently working on a PLC setup and could use some advice on the best way to manage my power supply units (PSUs). Here's the configuration...