Can S5 183U test 135U PS, CPU, DI,DO?

fidel

Member
Join Date
Jul 2004
Location
Macau
Posts
15
Ive found an S5 183U rack and would like to know if it can be used to test the 135U parts such as CPU 928B, DI, DO, AI, AO ..

If ok, what set up is needed to run the rack just like a 135 U
with CPU's , DI. DO , PS,

Any help is kindly appreciated,

regards,

Fidel
 
The 183U rack is an expansion unit and has no provision for a CPU. Therefore, with only this rack no testing is possible.

Regards,

FrankM
 

Similar Topics

Hi, I am using M221 reading from 3 different sensors (modbus rs485) sharing same bus (daisy chain). I am currently using READ_VAR (in total...
Replies
0
Views
78
I am trying motor startup with pf525 drive by using wizard start over ethernet communication but during direction test it's showing control error...
Replies
3
Views
176
See code at the bottom. Hi all. For the story, this is my first complete project using a Rockwell PLC, I've been mostly working with Unity Pro...
Replies
7
Views
784
My question is regarding the number of Test outputs vs the number of inputs in a module. In the case of a 1734-IB8S card, there are 4 test...
Replies
5
Views
1,143
Hi, I have to test a control logic that required to change the input temperature as the process variable from thermocouple transmitter on the...
Replies
7
Views
613
Back
Top Bottom