A-B ML1400 PTO control X-Y screws with coordinates

yuez

Member
Join Date
Aug 2003
Location
PA
Posts
1
Hello, I have a project using 2 stepper motors for X-Y table control, with following items:
ML1400 PLC (1766-L32BXB); HMI; 100mm x 100mm lead screws, 2mm/revolution; stepper controller: 200 steps/revolution. Function: move to 5 points and display X-Y coordinates on HMI. I try to use absolute coordinates only. Sequencing: from P0 (0,0) to P1 (-25,-25) to P2 (25,-25) to P3 (25,0) to P4 (-25,0) to P0.

I need help to get continue coordinates display on HMI. Thanks.
 

Similar Topics

Micrologix 1400 PTO function file. I set ADI to “1”. Right clicked ADP, selected “set independent accel/decel value location”, and entered L9:0...
Replies
0
Views
777
Hi all, I have a Micrologix 1400 BWAA and the correct software for it. I would like to learn to program PWM to control a stepper. I am currently...
Replies
3
Views
2,581
Hi everyone, I setting a PTO instruction with different Accel/Decel in ML1400 (ADI=1). According to the manual: “If separate acceleration and...
Replies
4
Views
2,497
Yep, I'm hammering this topic :shutit: For this application, we want the operator to be able to adjust when something happens based on a certain...
Replies
2
Views
2,074
Hi, Following on from previous post, I am setting up a ML1400 with Pulse Outputs. Found a headache in development, that if a rung as a PTOX...
Replies
4
Views
3,260
Back
Top Bottom