1756-en2tr

korry1

Member
K
Join Date
Sep 2008
Location
Houston, TX
Posts
4
Could I the 1756-EN2TR in a linear topology as this example?


1. 1756-EN2TR is assigned one IP address
2. 1756-EN2TR port 1 is connected to one router
3. 1756-EN2TR port 2 is connected to another router.
 

Similar Topics

D
Allen Bradley PLC 1756-L81E and EIP module 1756-EN2TR
I am using Allen Bradley PLC 1756-L81E and EIP module 1756-EN2TR for Ethernet/IP communication. My communication works fine but in Get-Attribute...
Replies
2
Views
194
Dsaxena
D
S
1756-EN2TR and a CPU with Ethernet not talking to it's twin PLC via the EN2TR
Hi All, Got a funny issue. I have a 1756-L85EP and a 1756-EN2TR in the same chase. The client asked for the Ferrari and the 3 lane highway!!! We...
Replies
1
Views
152
robertmee
R
D
Change supervisor status 1756 EN2TR
Good morning, I have a system on 1756 L73 that works with supervisor on EN2TR modules. Everything works correctly, except that EN2TR (1) with...
Replies
4
Views
483
desa
D
dalporto
1756-EN2TR Ethernet Module - Change Subnet Mask
Hi. Rockwell learning curve 132-1b. I was having trouble to change IP address on a EN2TR. Finally found out that I need to change the IP...
Replies
1
Views
743
AlfredoQuintero
A
R
1756-EN2TR DLR Config
Hello Everyone, What is the best practice for DLR set up. Should I keep all VFDs on one DLR and FlexIO on another or it would make sense to put...
Replies
8
Views
2,584
cidchase
C
Back
Top Bottom