s5 525 progro=am

hello ,I have an old plc s5 and for editing of the program of 525 c.p card I need the program software and the diagram of cables.
please help me.
another my problem is in the one operator terminal XBT-VB TELEMECANIQUE.
for upgrading of that I need the internal address of stored datas for changes with new citect-scada system.
thanks for your objections

Hi and welcome to the forum!

First you'll need COM525.
With an adapter, you can use the same rs232/current loop converter as you use to program the CPU.
Here's a link to COM525 with further links to the mauals.
http://support.automation.siemens.com/WW/view/en/24030890

Adapters and more S5 gadgets here:
http://träger.de/simatic-s5-interfacekabel/simatic-s5-interfacekabel-pg-kabel-rs232-tty-usb-tty.html

Good luck!

Kalle