Hi,
I'm trying to understand the ITV2030-312BS3 component.
I had a look at the internet about the device, but cannot specify get the information I require for the device. The basic device information can be found here http://www.digchip.com/datasheets/parts/datasheet/000/ITV2030-312BS3-pdf.php .
In the manuals of the device (http://content2.smcetech.com/pdf/manuals/E-ITV-STD-RF-A.pdf) it mentions about preset pressure so on the device this would be displayed as P_1, P_2, P_3 and P_4 this is seen on page 11. Does anyone know what this represents? As it cannot be the min and max pressure because those are represented by F_1 as shown on page 9.
Also, about the communication the input wire for the device can be supplied with 0 to +10V. What I'm I doing when I supply this voltage. Also, the output wire what is it measuring, the voltage I apply to input wire? Please could someone help me with this, I have looking on the internet for a while now and I cannot get the information about this. Also, I had a look at the company (SMC) who supplied the device, I didn't get what I needed.
Please someone help me.
Thank You
I'm trying to understand the ITV2030-312BS3 component.
I had a look at the internet about the device, but cannot specify get the information I require for the device. The basic device information can be found here http://www.digchip.com/datasheets/parts/datasheet/000/ITV2030-312BS3-pdf.php .
In the manuals of the device (http://content2.smcetech.com/pdf/manuals/E-ITV-STD-RF-A.pdf) it mentions about preset pressure so on the device this would be displayed as P_1, P_2, P_3 and P_4 this is seen on page 11. Does anyone know what this represents? As it cannot be the min and max pressure because those are represented by F_1 as shown on page 9.
Also, about the communication the input wire for the device can be supplied with 0 to +10V. What I'm I doing when I supply this voltage. Also, the output wire what is it measuring, the voltage I apply to input wire? Please could someone help me with this, I have looking on the internet for a while now and I cannot get the information about this. Also, I had a look at the company (SMC) who supplied the device, I didn't get what I needed.
Please someone help me.
Thank You