Allen Bradley PMCK/B Driver Issues

Hellooo

Just bought me a used pmck/b card off ebay. My old laptop has XP on it and I can't seem to get the right driver installed for it. When I have a successful driver install and try to get rslinx communicating over DH+ 230k baud, I get an error message saying that PMCK/A does not support 230k baud.
How do I confirm I have the correct driver for PMCK/B ?
Thanks

http://www.plctalk.net/qanda/showthread.php?t=55575

Is that any help?

ibdogged said:

Hellooo

When I have a successful driver install and try to get rslinx communicating over DH+ 230k baud, I get an error message saying that PMCK/A does not support 230k baud.

Click to expand...

Odds are your network is not 230k most are 56k, there are two drivers... one is for the hardware (your PC) you can download the drivers here
http://compatibility.rockwellautoma...roductDownload.aspx?keyword=PC Card&crumb=112

Here is the manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1784-um519_-en-p.pdf

The other driver is in RSLinx, see John's link for that setup, like I said odds are you do not need that speed

JohnCalderwood said:

http://www.plctalk.net/qanda/showthread.php?t=55575

Is that any help?

Click to expand...

Thanks , finally found the answer at this link. http://forums.mrplc.com/index.php?showtopic=10031

geniusintraining said:

Odds are your network is not 230k most are 56k, there are two drivers... one is for the hardware (your PC) you can download the drivers here
http://compatibility.rockwellautoma...roductDownload.aspx?keyword=PC Card&crumb=112

Here is the manual http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1784-um519_-en-p.pdf

The other driver is in RSLinx, see John's link for that setup, like I said odds are you do not need that speed

Click to expand...

Thanks
Found the answer at this link , and yes it was a 230k link, only one I have ran into. http://forums.mrplc.com/index.php?showtopic=10031