Communication between Mitubishi fx2n and Servo Over RS485

plcman

Member
P
Join Date
Aug 2004
Location
Wolverhampton
Posts
14
Hi

Does anybody know if it is possible to communicate with CT Unidrives from a Mitsubishi FX2n over a RS485 Network. If so any advice would be greatfully recieved.

Regards

Alan Edwards
 
Yes a FX2N PLC can communicate over RS485, you do need a optional BD board or a special module.
You must only write a program for the communication protocol.
A good example is deliverd within the manuals.
 

Similar Topics

Y
Communication between Delta plc DVP12SA2 and Arduino using MAX 485 module.
I'm trying to write a data in Arduino using MODWR function block .I used the code I got from online for both PLC and Arduino. I made the wiring...
Replies
4
Views
59
yawin
Y
P
Is put/get necessary for communication between 2 PLCs?
Or there is an alternative to this? I suppose there are many but I've only seen put/get Can you for example set up a new plc and connect it to an...
Replies
5
Views
295
JesperMP
JesperMP
A
Loss of communication between PLC and SEW frequency converter
Communication between devices will stop working for a certain period of time. I caught the error message using WireShark. I cannot identify the...
Replies
0
Views
97
AdamV
A
B
Communication error between TM221 with magelis HMIGTO
I am having trouble running the application throught my PLC, tm221me32tk with magelis HMIGTO6310 I have prepared the plc programme, also created...
Replies
0
Views
102
BODUSEYTU
B
S
Communication between toyopuc PC10g and Fx5u
Hi, I am trying to send data register type (D) from Toyopuc PC10g to FX5u. Does it possible to connect both plc using fx5u features which is...
Replies
1
Views
30,616
parky
P
Back
Top Bottom