Moustafa Elsherief
Member
Please could any one recommend me which digital I/P module of S7-300 can handle flowmeter pulses of 10 kHz frequency????
Siemens digital Input module Freq.
- Thread starter Moustafa Elsherief
- Start date
http://w3.siemens.com/mcms/programmable-logic-controller/en/advanced-controller/s7-300/cpu/compact-cpus/Documents/brochure_simatic-controller_en-43_table.pdf
Looks like any of the controllers from the specifications above.
Hope this helps,
Garry
http://www.accautomation.ca
Looks like any of the controllers from the specifications above.
Hope this helps,
Garry
http://www.accautomation.ca
Moustafa Elsherief
Member
OP
Thanks for replay, I have 6 flow meter with 10 kHz output so I am looking for 6 inputs at least
Last edited:
Similar Topics
Hello guys,
I have an issue about maximum cable length calculation of a digital input on Siemens SM321 card.
by calculation and according to...
I've been trying to find the max voltage rating of the 24VDC digital inputs on the Micromaster 420/440 drives from Siemens. I have found the...
On the laser displacement sensor now connected to my PLC, the manual says 4mA=643 and 20mA=64,877.
However, I checked with a Fluke, injecting...
I'm new to S7/TIA.
There's no devices connected to the PLC yet. I've got a laser measurement sensor (Micro-Epsilon optoNCDT 1220). From the...
Hi,
I'm pretty sure this is possible, but just wanted to make sure it is and if there are any examples available?
We are looking to replace a...