UL2011 vs UL508A

Gomez_

Lifetime Supporting Member
G
Join Date
Sep 2014
Location
California
Posts
195
We are a 508A Shop and usually sticker our own panels. We have 1 particular project that is requiring UL2011. As far as I can tell 2011 includes 508A along with other mechanical specs throughout the machine.

Does anyone have any experience getting a machine certified for UL2011?
 

Similar Topics

theColonel26
UL508A - Can a shop that did not build a panel, inspect and label/certify it as 508A?
We are considering dropping our UL membership because most of our customers do not care if we are a 508A shop. However, there may be times when a...
Replies
8
Views
396
JeffKiper
JeffKiper
T
Changes for UL508a panels to export to EU
Is there anyone that can give me the run-down on differences that are required for control panels sold in European markets, compared to those for...
Replies
3
Views
739
Rob...
R
J
How long to become UL508A?
Anybody have a recent experience becoming a UL508A panel shop? If so, how long did it take from initial contact to being able to apply stickers...
Replies
3
Views
1,232
LegacyLee
L
M
UL508A about Servo Motors.
Hello, do 3 PH AC Servo Motors ( 1S Omron) follow the same rules as regular AC servo Motors? can I use Table 50.1 (UL508) to calculate FLC of...
Replies
4
Views
2,037
Karlag12
K
MikeyN
  • Poll
Poll for UL508A MTR Test Results
Luckily, I do not have to worry about this test, but I am creating this poll for atc2222.
2 3
Replies
36
Views
40,483
Sbarlock
S
Back
Top Bottom