receiving 20 characters and sending back 20 characters

rlathbury

Member
R
Join Date
Oct 2015
Location
Burton
Posts
1
Hello,

In Siemens Step 7 could anyone please tell me how to recieve and send up to 20 characters and also display them on a Siemens 'Touch Panel' HMI.

Many Thanks,
Richard.
 

Similar Topics

D
Powerflex 525 not receiving speed value
Hello, We are using a CIP(Clean in Place) system with a powerflex 525 to run its pump. We are able to see the VFD through ethernet, its Enet...
2
Replies
15
Views
826
joseph_e2
J
B
RTAC DNP3 receiving multi messages
I have pi osisoft DNP3 icu communicating with a SEL RTAC. I am receiving multiple messages from the rtac on each register. With analog tags...
Replies
0
Views
685
bdossantos
B
B
Receiving Modbus into S7-1500
We have an old modicon bit of kit that receives 48 registers (24 reals) from a PC system via modbus TCP. We're looking to upgrade the PLC to...
Replies
3
Views
1,959
Lare
L
S
FX3 receiving wireless I/O signal without PC
Hi, can my mitsubishi FX 3 receive wireless I/O signal without PC? By the way, I am using WISE 4210 by advantech, a proprietary LPWAN (Sub-G)...
Replies
3
Views
1,375
goghie
G
S
Receiving UDP broadcast on S7-400 CP443-1
I am troubleshooting the setup of UDP broadcast receiving on a CP443-1 CP card. The telegrams appear in WireShark with IP 192.168.1.255 Port 7551...
Replies
6
Views
2,284
superted
S
Back
Top Bottom