AB Logix / CMP and MOV not working

MartyMaucher

Member
Join Date
May 2014
Location
Pensacola
Posts
91
Well, I don't see why these CMP and MOV instructions are not active. I understand the bManZeroAOut input can be misleading if it gets turned off somewhere else, but I even put a jumper across it and still got no results.
Any ideas?:confused:

PLCCMPMOV.jpg
 

Similar Topics

Hello, I've been having trouble getting the syntax correct in my expression for a CMP instruction. My expression is: (VarA > VarB) AND (VarA >...
Replies
20
Views
13,796
I have been doing logic programming and troubleshooting for about 25 years. I started working for a new company as PLC Application Engineer and I...
Replies
5
Views
111
We are trying to poll data coming from a PLC for remote monitoring we have the IP address of the PLC and the default port number and the path is...
Replies
25
Views
411
I am currently backing a Micro Logix 1100 and no-one seems to have the file for me to upload from. Is there a way for me to upload the project off...
Replies
15
Views
340
Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
138
Back
Top Bottom