Comcon 200

RadRanger

Member
R
Join Date
Mar 2015
Location
staffordshire
Posts
2
Hi
I Have a COMCON 200 Operator Interface made by BERTHEL
I'm trying to test it before I send it out to my customer but I cannot find any manuals or info on it at all
All I can do is power it up
Does anyone have a link to any manuals? or know what the software's called to program it?
I believe it uses the same as the COMCON 110
Much Apreciated
 
Berthel Comcon 200

Hi There,
Did you ever get anywhere with this? I have a 200 on a Tiromat labeller that has just dropped into my lap and need the LCD display or just the backlighting. Be nice to know what software it runs. I heard PCS7?
 

Similar Topics

R
S7-200 recovery program from eeprom
Hi. I have a 222 CPU. I need to recover the program from the eeprom memory. Is it possible?
Replies
1
Views
78
BryanG
B
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
248
KalvMavin
K
J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
79
jimix
J
T
Lenze 8200 motec inverter
Hi folk, I would like to know what kind of Parameters should I setup for controlling with Profibus. My old Lenze 8200 motec 0.25kW have a busted...
Replies
0
Views
79
tientran
T
S
Function Block Diagram S7 1200
Hi, I have attached herewith one image which our programmer has been used in S7 1500 PLC. Now we need to use the same instructions in S7 1200 PLC...
Replies
4
Views
118
mk42
M
Back
Top Bottom