Analog Card Stops Updating

asterof

Member
A
Join Date
May 2007
Location
Califonia
Posts
554
1768-L43
Slot 2 1769_IF8
System running fine
After a day or so all data stops updating
Last values remain in Local:2:I
Must cycle power to restore module operation

Never seen this before
Any ideas

Thanks
 

Similar Topics

K
Omron AD081-V1 Analog Input Card Calibration (Offset & Gain Adjustment)
Omron AD081-V1 Analog Input Card Offset & Gain Adjustment Entering Adjustment Mode 1. Set the input card in adjustment mode (Turn ON Dip SW No-1)...
Replies
0
Views
54
Ko Lin
K
J
Omron Mad42 analog card
Hi all, i was trying to learn the analog card and got pulled off. now i am asking for your help again. this is what i have. all i/o are enabled...
Replies
3
Views
1,294
IO_Rack
IO_Rack
B
1756-IF8 - Wiring a RTD to this Analog Input card ?
Good Morning , I have a RTD , that I would like to wire into a 1756-IF8 Analog Input Card. Would you all a simple wiring diagram , of what...
Replies
4
Views
1,183
George Graziano
G
S
Omron analog card help
We have an omron CJ2M-CPU12 PLC that we are having issues with an AD04U analog card. it is connected to a K type thermocouple sensor. The card is...
Replies
4
Views
588
gtsuport
G
J
Omron CJ2M and MAD42 analog card help
Hi all, While i am not new to omron, i'm totally new to the analog part and lost. i have a CJ2M cpu 33. then there are 4 i/o cards card 5 is a...
2
Replies
26
Views
2,563
lostcontrol
L
Back
Top Bottom