Has anyone had any luck using Inductive's Ignition OPC UA AB driver with Logix5000 emulate? I have Ignition and Emulate5000 installed in the same VM and am hoping if I can get the connection path right that it will connect up and browse tags. I've been using Localhost for the IP address.
I've figured out how to get Ignition to talk to the emulator through OPC-DA and RSLinx topic, but that doesn't autobrowse/refresh the tags, so I wanted to try the UA driver and so far no luck in getting it to connect. I figured maybe one of the AB experts here might be able to recommend a CIP path to try in the Ignition config. Are there any special CIP values needed when trying to communicate over the Virtual Backplane? Is it even possible to do CIP through the VBP?
-Greg
I've figured out how to get Ignition to talk to the emulator through OPC-DA and RSLinx topic, but that doesn't autobrowse/refresh the tags, so I wanted to try the UA driver and so far no luck in getting it to connect. I figured maybe one of the AB experts here might be able to recommend a CIP path to try in the Ignition config. Are there any special CIP values needed when trying to communicate over the Virtual Backplane? Is it even possible to do CIP through the VBP?
-Greg