Hi,I have Siemens 315-2PN/DP and i want to connect ABB drive to PLC S7 with profibus which parameter in ABB ACS550 drive i have to set?
i set 98.02 to 4
set 10.01 to 2(default)
set 10.02 to 0
set 11.02 to 0
set 10.03 to 3
set 53.03 to 2
set 51.21 t0 0
set 53.05 to 2
TNX
i set 98.02 to 4
set 10.01 to 2(default)
set 10.02 to 0
set 11.02 to 0
set 10.03 to 3
set 53.03 to 2
set 51.21 t0 0
set 53.05 to 2
TNX
