win cc flexible Questions

Hi guys.


I need* you help make one cycle in win cc flexible

I need make two screens one above one worked so:

1. The first screen that can not enter the second. Until it detects a signal field in plc siemens

2. Thwn detecting the signal field in the plc switched turn off or erased the first screen and the second screen is just so you change the second display (scren 1)

3. The screen goes a few seconds to change and return to the first screens

Use winCC plc job 51.

https://support.industry.siemens.co...flexible-via-controller-job-51?dti=0&lc=en-DE

Thank you..

You can helpme please so example...