Mitsubishi q series plc data communication issue

nagaraj5581

Member
Join Date
Jul 2014
Location
singapore
Posts
2
hi,
i am using Mitsubishi Plc Q series,
we have 2 separate system both also using Q series plc,
Each system also have QJ71E71-100 communication module,
each system connected through individual Ethernet hub,
Now my question is,
i need to send 50 data to system b,and read 50 data from system b.
help me, how to communicate each plc.
how to do the program and setting.
i am totally new in mitsubishi plc.


thanks in advance .

by
raj
 
:site:
hi,
i am using Mitsubishi Plc Q series,
we have 2 separate system both also using Q series plc,
Each system also have QJ71E71-100 communication module,
each system connected through individual Ethernet hub,
Now my question is,
i need to send 50 data to system b,and read 50 data from system b.
help me, how to communicate each plc.
how to do the program and setting.
i am totally new in mitsubishi plc.


thanks in advance .

by
raj
 

Similar Topics

Hi One of the PLC's that I maintain/update is a Mitsubishi Q-Series, probably installed about 10 years ago. At the moment, ALL the wires from...
Replies
13
Views
1,132
Hello everybody! I found option for creating communication with Q series via python. But can't find any tips for connecting with PLC FX series...
Replies
3
Views
5,241
using Q03UDV plc &QY42P for outputs.....working ok i want to use new output ..download the programm but output does not show 24 v in...
Replies
16
Views
3,203
Hi, I need to send a digital output to turn a water pump Inverter driver ON/OFF. To this end, I'm planning to use a Digital Output Module, i.e. it...
Replies
16
Views
3,447
Hi, Today I connected up a previously spare QD68TD-G module, configured for inputs from eight K-type TC's. However, when I connect a Fluke to...
Replies
23
Views
5,470
Back
Top Bottom