deathfromoverwork
Member
So I'm on a beginner class(infant level), trying to build a 'double automatic door'
and i'm having a lot of troubles..
getting a lot of errors
theses are the requirements.
sorry.. this is the best i can draw
(Explanations for the pic)
-Sensor S1 is in front of a door1, S2 is between two doors and S3 is behind the door2
-M1 is Door1's opening motor and M2 is the closing one
-limit switch L1 turns ON when Door1 is fully opened and L2 turns ON when fully closed
-M3 is Door2's opening motor and M4 is the closing one
-limit switch L3 turns ON when Door2 is fully opened and L4 turns ON when fully closed
(Requirements)
1.When Sensor S1 or S2 senses someone, Door1 must be opened for 3seconds.
2.When S1 or S2 is OFF, Door1 is closed.
3.When Sensor S2 or S3 senses someone, Door2 must be opened for 3seconds
4.When S2 or S3 is OFF, Door2 is closed.
well this is how much I managed to do
if there's something missing or wrong, could you please tell me.
i guess I can't study this field with only a book..;
and i'm having a lot of troubles..
getting a lot of errors
theses are the requirements.
sorry.. this is the best i can draw
(Explanations for the pic)
-Sensor S1 is in front of a door1, S2 is between two doors and S3 is behind the door2
-M1 is Door1's opening motor and M2 is the closing one
-limit switch L1 turns ON when Door1 is fully opened and L2 turns ON when fully closed
-M3 is Door2's opening motor and M4 is the closing one
-limit switch L3 turns ON when Door2 is fully opened and L4 turns ON when fully closed
(Requirements)
1.When Sensor S1 or S2 senses someone, Door1 must be opened for 3seconds.
2.When S1 or S2 is OFF, Door1 is closed.
3.When Sensor S2 or S3 senses someone, Door2 must be opened for 3seconds
4.When S2 or S3 is OFF, Door2 is closed.
well this is how much I managed to do
if there's something missing or wrong, could you please tell me.
i guess I can't study this field with only a book..;
Last edited: