Greetings,
I am very new when it comes to programing/editing plcs.
I am using Sysmate software (v1.20) to program a Omron CQM1H-CPU51 PLC with windows NT in a DOS shell. I have no trouble monitoring the PLC ro going on/offline.
My goal is to isolate and modify a output used on tool here at work. I know what the address is, but there is > 5000 adresses to search through.
It would help me very much if someone could link me a manual, or document that could give me insight on how to use the program.
Other comments and suggestions are welcome. I have come up dry searching this forum and mrplc.com
Thanks!
I am very new when it comes to programing/editing plcs.
I am using Sysmate software (v1.20) to program a Omron CQM1H-CPU51 PLC with windows NT in a DOS shell. I have no trouble monitoring the PLC ro going on/offline.
My goal is to isolate and modify a output used on tool here at work. I know what the address is, but there is > 5000 adresses to search through.
It would help me very much if someone could link me a manual, or document that could give me insight on how to use the program.
Other comments and suggestions are welcome. I have come up dry searching this forum and mrplc.com
Thanks!