SICK PAC50 (CCD) Pressure switch - Analog Output

JohanM

Member
J
Join Date
Sep 2015
Location
Terchová
Posts
53
Hi my friends. I have a problem with this pressure switch with analog output. I have it connected to the Balluff I/O link analog module (BNI IOL-709-000-K006). The analog output of that sensor works automatically. Somehow it can detect that if it is connected to analog input and if it is V or C input. And that is my problem. Its look like it cant detect that and then sensor do not show me analog options.o_O Do you have some experience with this sensors? Thank you very much for any informations. And sorry for my English :)
 

Similar Topics

L
Question about SICK Safety Laser-scanner for robot arm
Hi I have a yaskawa gp7 robot arm which I am going to use for machine tending with a cnc mill. Is it a good idea to buy a SICK laser scanner for...
Replies
5
Views
183
bill4807
B
D
SICK AFM60a Saving Parameters to Non-Volatile Memory
Hi all, I have installed a SICK AFM60A-S4IB018x12 encoder to Allen-Bradley CompactLogix PLC and configured its parameters via AOI provided by...
Replies
0
Views
89
dirty_magic
D
F
Using CLV630 sick scanner with a micro850
I have a CLV630 scanner successfully communicating with a Micro850 controller (over Ethernet/IP) but I don't know how to convert my scan...
Replies
0
Views
815
Fraser
F
C
Banner , Sick , etc. Slot on Fork Sensors . Do they make them wider than 8.66 " ?
Banner , Sick , etc. Slot on Fork Sensors . Do they make them wider than 8.66 " ? Good Morning , I have product that is coming down the...
Replies
3
Views
1,020
dYoast
D
R
Restoring default IP address of Sick FX0-GENT
I've inadvertently tick the DHCP box in the sick software and uploaded this in the PLC (Sick FX0-GENT) and now i am unable to connect to it. Is...
Replies
1
Views
990
ronplc
R
Back
Top Bottom