First program

RayK

Member
RayK
Join Date
May 2004
Location
Geraldton West Australia
Posts
90
project is an auto sampler, pnuematic ram extends every 15 mins and then retracts with the option if an immediate sample is needed a button is pushed and the ram extends 4 times. my question is this the program iv'e written seems rather long and convuluted for such a simple job! is there a better (simpler)way of doing this task? the attached file is rss just change the extention.
 

Similar Topics

R
S7-200 recovery program from eeprom
Hi. I have a 222 CPU. I need to recover the program from the eeprom memory. Is it possible?
Replies
1
Views
82
BryanG
B
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
87
mk42
M
C
Need Help Accessing/Printing a Program - CIMPLICITY
Hi all, I am having issues accessing my Cimplicity software - the site code changed after re-install and I am no longer able to attain a new key...
Replies
10
Views
162
Steve Bailey
Steve Bailey
E
PLC Wiring and Program Review
Posted this to Reddit with little success, so I figured I would share it here as well. Very new to PLCs, but figured I would give it a shot to...
Replies
0
Views
122
eerielayne
E
A
Tank level rslogix 5000 program. I’ve got errors on rung 2,3,4. Do u see the problems? Also does my geq n les look right?
Replies
4
Views
195
drbitboy
drbitboy
Back
Top Bottom