Feel free to ask any PLC RELATED question here. If you know the answer to an existing question, help everyone by posting an
answer.
Enjoy!!!
- Locked
- Sticky
Hi folks,
If you're having any login issues kindly send an email to [email protected] or use the 'contact us' link on the bottom of every page to get...
Hello all,
I am currently trying to program a PowerFlex 525, version 7.0. We had a power outage recently and when the power was restored, the...
Sorry in advance for the long post, but this requires a little back story.
I work in a facility with a couple hundred VFDs
Most are in a web...
Hello
I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Hello all,
We have a machine that has a 1756-L55 controller revision 10.24. In your opinion at what point is it time to upgrade a controller after...
Hello,
I've searched long and hard for this and found a great thread from 2008 about animating pipes and it turned out it was a bit of a flame...
After some interesting conversation regarding the safety of emergency stops, I saw some posts talking about the safety standard conversation...
Looking at installing point io, with a 1734-AENTR communications adapter and ten 1734-IT2L modules. In IAB it installs a 1734-EP24DC after every...
Hi everyone, new to forum. Since very long time i having issue with 1734-AENT module, after some period of time its keep stuck in error (simmilar...
Hi All,
Someone at work has put a PLC system on my desk, that's just been taken off an idle production line.
He said "It's an S7 PLC. We don't...
Hello! If someone can help me with the following problem.
I can't change the phone number. Do I really need the interface (AL-232CAB - Programming...
Hi Everyone,
i was hoping for a little help with this module. i have data that needs to be read from a different plc through the Modbus plus...
the conveyor can stop because of a safety sensor or safety switch. And also it can stop because of an object jam detector sensor. If the conveyor...
Anyone know of a cheap foundation fieldbus communicator? Something like the USB 8486 H1, but one that does not cost $3k?
Thanks,
Trevor
EDIT: I...
Hello,
I am trying to replicate a piece of logic on the PLC5 onto an SEL RTAC. I am using ladder on SEL and FBD. I am having issue on the ladder...
Hi all,
I am looking forward for all available PLC code conversion tools or links for the companies which provides such conversions.
Thanks in...
please help me . I have to make this ladder diagram and I can’t figure it out :(
I have Woodward Controller EASYGEN-3500XT and Phoenixcontact make IO CAN-CUPLER part no: 2702230, Analog Input card: 2861412, Analog Output Card ...
Hi all. I want to ask what may seem a stupid question, as I have a project to send live data to a Yeacode line printer which will print meterage...
Hi, I have a ControlLogix system with 1756-IF16 analogue inputs. I can't scale the inputs at the card as there is a requirement to facilitate...
I am considering using a "magnetic cable tie mount" like this one:
https://www.grainger.com/product/MAG-MATE-Magnet-with-Zip-Tie-Holder-49M018
It...
When trying to export a template object, or the whole galaxy to a .aaPKG file, Archestra reports export completed immediately, with nothing else...
Hey all, first time poster here.
I am wondering if anyone has tried using a Keyence SR-X300 barcode scanner to a Micrologix 1400.
Keyence sent...
Looking for a supplier of Layer 3 Network Switches DIN RAIL MOUNT, in Alabama, In the UK we would use Typically in the UK we would use...
Hi all
I have a ControlLogix 1756-L71SP that i want to use for general PLC applications, not safety. I am running Studio5000 v33, i can't...
I have an existing machine that we are adding some functionality. Currently every cable such as a cable going out to a 4-20 psi sensor for example...