I have a micro 800 that keeps going into fault mode. The fault code is 0xF000
The controller was unexpectedly reset due to a noisy environment or an internal hardware failure.
If system variable_SYSVA_USER_DATA_LOST is set, the controller was able to recover the user program.
but the user data is cleared. If not, the Micro800 Controller program is cleared.
Does this mean that if the Data-Lost variable is not set the controller deletes current program?
What could be causing this fault code to be reoccurring?
The controller was unexpectedly reset due to a noisy environment or an internal hardware failure.
If system variable_SYSVA_USER_DATA_LOST is set, the controller was able to recover the user program.
but the user data is cleared. If not, the Micro800 Controller program is cleared.
Does this mean that if the Data-Lost variable is not set the controller deletes current program?
What could be causing this fault code to be reoccurring?