OPC Update Rate

Sceptre

Member
Join Date
Dec 2003
Posts
28
i'm using OPC to view changes in my system and need to monitor pressure for 1 minute...would like to monitor it at least twice a second, more is better, however, my OPC server is only letting me see the updates every 1 second. I am using CoDeSys OPC Server v2.3.7.4 and MetaDynamics OPCClientX-AE, with a Moeller XC-CPU101.

Does anyone know if I can get a faster update rate from this setup?

TIA
 

Similar Topics

I know this is not a excel forum but would you have any ideas.For your information it is Cognex Insight OPC Server I am collecting data from a OPC...
Replies
7
Views
4,501
If anyone has a crack for IBH OPC Server, please send it to: [email protected] Urgently. Thanks in advance!
Replies
1
Views
55
Folks, I have a client with an old ABB Advant / MOD300 system (v14.4). Around y2k I installed the ABB Industrial IT MOD300 OPC Server 1.1/2...
Replies
0
Views
65
Hi good day Everyone, I have a cimplicity v10 project with 7 to 8k tags communicating with AB PLC through OPC and Rslinx classic. I have this...
Replies
1
Views
80
Hi all, I am using OI.GATEWAY.2 to communicate to the PLC using an OPC UA. I can see the tags using an OPC explorer connecting to the...
Replies
0
Views
129
Back
Top Bottom