Remote I/O in Softlogix

jomm

Member
J
Join Date
May 2010
Location
Makati
Posts
1
I just want try to communicate a Remote I/O to Softlogix. I already add and configure Ethernet communication module for Softlogix. I also clear the "accept UDP messages on ethernet port" in RSLinx. Still i got a communication timeout in ENBT module configured in the network.
Softlogix connection to ENBT.jpg
 

Similar Topics

A
1771-ASB Remote Rack Communication Status
I am working with a remote rack with a 1771-ASB adapter, and inside Logix 5000 I am trying to find where it displays the status of each of the...
Replies
8
Views
77
Jmeadows7676
Jmeadows7676
Z
Fail to create boostrap on remote machine serverA.
Hi all, recently, I deployed Intouch SCADA to the 7 clients PC, but one PC got pending to update the objects and unable to successful. There is...
Replies
0
Views
40
zawah
Z
AutomationTechBrian
Sharing a remote I/O rack between two controllers.
Something I've never thought about before... maybe you folks have some thoughts or experience. I have a customer that uses a Weidmuller, Modbus...
Replies
3
Views
187
AutomationTechBrian
AutomationTechBrian
Z
SCADA Pack RTU 474, IO card (5606) Not responding in Remote Connect
Hi, We have been facing a issue with SCADAPack 474. Configuration is like below. RTU 474 + 6103 PS + 5606 IO Mix Module + 5414 DI Module Only...
Replies
0
Views
80
Zubairjaved786
Z
B
Recommendation for Expandible remote IO with OPC UA
Hello, Can anyone recommend an expandible IO module with OPC UA? I've deployed the Emerson RSTIO-OM module and it works great, but it has a...
Replies
0
Views
66
BeepBob
B
Back
Top Bottom