Panel Tec Communications

blacksilver80

Member
B
Join Date
Mar 2007
Location
MICHIGAN
Posts
14
I have a machine with the PLC communicating to the Panelmates through PanelTec but I am having trouble with communication with the Panelmates to the PLC. I have never worked with a PanelTec before I was wondeing if anybody knows how I can see or change the Baud rate on a PanelTec board the PanelMates are running on 19200 but I dont know if I can get into a PanelTec
None of my Port Lights that connects to my Panelmates are ON. I have double checked the communication cables and electrical connections it seems fine its just I cant find any information on PanelTec
 

Similar Topics

S
Weintec hmi panel macros
Somebody know how to unlock a pass protected macro in easy buider ?
Replies
0
Views
114
Solskier2000
S
P
AB ControlLogix to Bartec Polaris Operator Panel
Hi, Has anyone used a Bartec Polaris Ex rated operator panel with Allen Bradley ControlLogix? I am looking for the best option for...
Replies
0
Views
2,162
pr_wainwright
P
S
A-B Panel View Plus 7
We have boiler control system runs on A-B PLC. The interface is A-B Panel View Plus 7, mounted on the local control panel very near the boiler...
Replies
2
Views
37
Ken Roach
Ken Roach
S
Multiple Panel View 7 on one A-B PLC.
Can I connect two A-B Panel View 7 to a A-B PLC. Same graphics etc. One on the local control panel and the other Panel View 7 in a remote control...
Replies
2
Views
35
James Mcquade
J
K
B&R POWR PANEL 400
I HAVE B&R POWEL PANEL 400 HMI. THE ISSUE IS HMI NOT BOOTING, DISPLY SHOWING CONTIUESLY (ATTEMPTING TO A BOOT HARD DRIVE....)
Replies
1
Views
74
collinsd70
C
Back
Top Bottom