FS Gateway communication failed with FT Gateway

Join Date
Apr 2011
Location
Manila, Philippines
Posts
295
Hi Guys,


I'm facing a huge problem now. I hope someone had already encountered this problem 🤞🏻 .

So here's the set up:

-Wonderware will get the data from FactoryTalkView via FSGateway.
-in order for Factory Talk view to give data we used Factorytalk Gateway.
-Wonderware is for "read only" purpose
-We have 2 Workstations
> OWS 1 for Wonderware, FSGateway was installed here.
> OWS 2 for FactoryTalk View, Factory Talk was installed here.

I set up the FS Gateway, set Factory Talk Gateway as an OPC server.

Now, I got this -/W status which means a failure to read. I already set the DCOM settings of FTGateway to "none"

Is there something I miss? specially in device settings since I have a remote Server.


Thank you very much Guys.
God Bless

FSGATEWAY HELP.jpg
 

Similar Topics

Hi Guys, I'm facing a huge problem now. I hope someone had already encountered this problem 🤞🏻 . So here's the set up...
Replies
0
Views
2,566
Hi, We are trying to communicate GE CPE305 PLC (over modbus TCP) with the Siemens drive (Profibus) using Anybus AB7629 module which is Profibus...
Replies
1
Views
1,929
Currently OPC Client (PI OPC Interface from OSISOFT) is reading the data from RSLinx Gateway which is installed on different PC. And we are...
Replies
3
Views
6,960
I have an application where I am trying to communicate from GE 90-70 PLC using the IC697CMM711 module to an FES COMNET Gateway. I have proven the...
Replies
5
Views
15,930
I have an application where I am trying to communicate from an Allen-Bradley SLC 5/05 using the DF1 port to an FES Gateway. We have 3 compressors...
Replies
0
Views
2,663
Back
Top Bottom