Get System Time

piash.ali

Member
P
Join Date
Sep 2017
Location
Germany
Posts
19
Hi
I have tried to current time from the system (Beckhoff-cx5130) by "GETSYSTEMTIME", but I am not getting any output.
I have tried "NT_GetTime" "TIMESTRUCT" and "T_FILETIME" but showing some compiling error.
Any suggestion regarding this issue will be highly appreciated.
Thanks!
 

Similar Topics

I
Set points on a triplex system
Hello, I have no training in maintaining potable water systems, so forgive me if some of my terminology is far off the mark or if I'm focusing on...
Replies
0
Views
75
indykins
I
A
SLC messaging with a ControlLogix redundant system
I have a redundant ControlLogix being set up. This program reads a value from a remote site which happens to be SLC PLC. Rockwell mentions SLC...
Replies
2
Views
89
robertmee
R
D
Hardware Configuration Changes to Live Siemens System
Hi all, This is going to be a long post apologies. I'm also a complete beginner to the world of PLCs. I'm currently working on my first ever...
Replies
10
Views
431
mk42
M
P
Using a Dedicated Controller for Improved Resolution in a Nozzle Array System?
Hello everyone, I'm working on a project that involves controlling an array of nozzles within a CNC environment, where the nozzles travel along a...
Replies
5
Views
175
piter
P
P
Simatic Wincc 7.5 SCADA system
I am utilizing both HMI and SCADA for my project. Both HMI and SCADA have identical tags. When I modify the tag value on HMI, it is reflected in...
Replies
2
Views
134
Parthiban balasubramnian
P
Back
Top Bottom