Ethernet IP Adress Mapping for Compact Logix

afeefabdussamed

Member
A
Join Date
Sep 2016
Location
Jeddah
Posts
24
Dear all

Can any one guide me for mapping in compact logix in RS Logix 5000 which I will be using MOXA MB Gate 5105 for converting Ethernet IP to Modbus TCP.I am confused in Mapping.
 

Similar Topics

K
Mitsubishi F800 Control Via Ethernet IP
So the customer purchased a Mitsubishi drive, in the same project for a different pump they got an ABB drive, was literally whatever they could...
Replies
1
Views
40
kdean94
K
L
FactoryTalk Linx Ethernet config error
Hello everyone I have the next issue with FactoryTalk Linx, when i configure the Ethernet driver and try to find the IP Address of the PLC Device...
Replies
0
Views
46
Lawrence Alcocer
L
S
A-B cable 1747-C13 for use with adaptor 1747-UIC... Just a regular ethernet patch cable?
Hi all I am working with a SLC 5/02 and having trouble getting online with it. I am using a 1747-UIC adaptor which allows for USB>serial and...
Replies
9
Views
146
Skidood
S
P
PG/PC ethernet connection
Hello guys i'm working with an s7 1200 plc with an ET 200S expansion module. The problem is that i can't find the plc when searching in the...
Replies
1
Views
113
RVaughan
RVaughan
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
8
Views
344
JesperMP
JesperMP
Back
Top Bottom