Beckhoff TC2 ADS Error 1796 writting/reading not permitted

AivisNewBie

Member
Join Date
Mar 2018
Location
None
Posts
9
Hello all,

I ran in to some trouble.
I created 2 virtual machines to try out ADS communicating One machine is a PLC (TC2 32bit (runtime)), other is (should be) a client (TC2 64bit engineering+ Visual studio adsAPI) that should read/write from/to PLC VM.

1. problem : TC2 64 bit engineering does not find a PLC VM. (i know it is possible to find it (https://www.reddit.com/r/PLC/comments/2mhbjh/help_connecting_twincat_211_plc_program_running/ )but mine does not find it)

2 problem: (bigger one). I can find this VM PLC from other 32bit VM with TC2 32bit, but when I try to "add route" I get ADS error 1796.

I saw one post on this forum about very similar issue(http://www.plctalk.net/qanda/showthread.php?t=89563&highlight=ADS+ERROR+1796), but could not find answer here.

Maybe someone here tried this out and could help me out?

thanks you all in advance :)
 
For those who are instrested I managed to fix my problems.

2 Problem [Solved]: silly mistake Beckhoff add route requires PC name and password so entering it removes the problem and route is added

1 Problem [Solved]: dont know why but TC2 64 bit (engineering) does not install good on Win 7 (pro), trying this on W10 mashine worked like a charm :)

hope this helps someone :)
 
I tried to install it again as "Admin" but no luck, the symbol of TC2 (the one that is blue in config mode) is blank on W7 pro (Virtual Machine) :)
 

Similar Topics

Hello Long time lurker. I am flailing around trying to figure out how to implement MODBUS TCP on a W2000 IPC that controls one of my company's...
Replies
10
Views
5,778
Hello all, I've got a problem with Alarm history display and saving to file, I tried to follow example on beckhoff site...
Replies
1
Views
1,813
Hi everyone, This is my first time posting, so please forgive any omissions or mistakes. I am attempting to control the velocity of a stepper...
Replies
18
Views
741
Hello sameone have Beckhoff PLC Siemens Sinamics V90 configuration example?
Replies
0
Views
83
hello, I am using Beckhoff with TwinCAT3 and when I change or add some new hardware or for any reason, there is a mismatch in the real hardware vs...
Replies
1
Views
109
Back
Top Bottom