I've been using 5000 primarily. I've been able to based on prerequisite bits firing make an hourly production tag looking something like HourlyProd[datetime.hour]
Is there anything similar in 500? I need to make hourly production counters for a 24 hour day, sectioned by shifts.
Someone had previously started it on this project, however it's rudimentary and pretty monotonous. It's as such: If time between x and x prodbit fires into a counter. It's done 10 times for the first shift. Instead of doing it 14 more times, there has to be a more direct (read as: less lines) route, right?
Thanks so much in advance.
Is there anything similar in 500? I need to make hourly production counters for a 24 hour day, sectioned by shifts.
Someone had previously started it on this project, however it's rudimentary and pretty monotonous. It's as such: If time between x and x prodbit fires into a counter. It's done 10 times for the first shift. Instead of doing it 14 more times, there has to be a more direct (read as: less lines) route, right?
Thanks so much in advance.