blacksilver80
Member
I have a machine with the PLC communicating to the Panelmates through PanelTec but I am having trouble with communication with the Panelmates to the PLC. I have never worked with a PanelTec before I was wondeing if anybody knows how I can see or change the Baud rate on a PanelTec board the PanelMates are running on 19200 but I dont know if I can get into a PanelTec
None of my Port Lights that connects to my Panelmates are ON. I have double checked the communication cables and electrical connections it seems fine its just I cant find any information on PanelTec
None of my Port Lights that connects to my Panelmates are ON. I have double checked the communication cables and electrical connections it seems fine its just I cant find any information on PanelTec