Scada for S7-200 smart

Hi dear all,

I have a S7 200 smart plc. I am using Micro win smart to program the PLC. I had no luck in designing the Scada system I tried out wincc 2008 flexible but connectivity is the main issue. I am using the Enternet cable and I prefer using it. Please help me out. I have to finish this project soon

There is WinCC flexible SMART V3.....

I am not sure but as I remember that if Scada works for S7-1200 it will work also for s7 200 Smart....

Switching to Modbus RTU protocol will help you with connectivity.
https://support.industry.siemens.com/tf/WW/en/posts/s7-200-smart-with-v20-modbus/118107?page=0&pageSize=10

https://w3.siemens.co.in/automation/in/en/automation-systems/industrial-automation/s7-200-smart-plc/pages/faq0120-5762.aspx

https://support.industry.siemens.com/tf/WW/en/posts/communication-b-w-wincc-flexible-pc-runtime-and-modbus-meter/67097?page=0&pageSize=10

The above links may help you out with connection between the wincc 2008 and S7 200 smart plc via Modbus RTU.

You may also want to check out AdvancedHMI for the communication. This would also help you test the Modbus communication.
https://sourceforge.net/projects/advancedhmi/

Regards,

And I used some time ago on PC scada named Promotic.....it is free up to 30 variables and it works using ethernet connection (IP adress)...

it works without problem with Smart PLC....