behnamelfy
Member
Dear colleagues
Actually, we are using PCS7 RTX box for our project. This project has a pressure sensor which gets some values. We have used MonAnalog block and faceplate.
As you know from the block it produces some alarm and warning which we want to use it in our system. like Alarm high, Warning high But I don’t how can I adjust these values in the alarm logging in the project.
As we part of this project made by others. when I check the alarm logging in WINCC I see that they have made some alarms. but how can I adjust alarms from the blocks to the alarm logging in WINCC?
Thanks and Regards
Actually, we are using PCS7 RTX box for our project. This project has a pressure sensor which gets some values. We have used MonAnalog block and faceplate.
As you know from the block it produces some alarm and warning which we want to use it in our system. like Alarm high, Warning high But I don’t how can I adjust these values in the alarm logging in the project.
As we part of this project made by others. when I check the alarm logging in WINCC I see that they have made some alarms. but how can I adjust alarms from the blocks to the alarm logging in WINCC?
Thanks and Regards