Hi there, as the title suggest I was hoping that someone could help me out a little bit.
I am currently updating an pallet trolley system from using photoeyes for postition control and discrete inputs on the vfd for Start/Stop/dir.
I have installed a Linear encoder on the trolleys track for postition control and feed it back into the (everybody calm down) micro850 PLC.
My next step is to use the abb´s acs380 Vdf embedded Modbus for Start/Stop/dir/speed and use the Micro850 as master.
I stumbled upon a RSLOGIX 500 Modbus RTU sample program for MicroLogix controllers at ABB´s web page. CCW has a converter for .slc to .ccw. How well that works, I have no idea.
I haven't used ABB´s products yet, I have used Yaskawa VFDs before and it is probably simmilar-ish, but I just wanted to check out the sample program.
if there is someone kind enough to save the .rss in .slc for me, it would be much appreciated.
I am currently updating an pallet trolley system from using photoeyes for postition control and discrete inputs on the vfd for Start/Stop/dir.
I have installed a Linear encoder on the trolleys track for postition control and feed it back into the (everybody calm down) micro850 PLC.
My next step is to use the abb´s acs380 Vdf embedded Modbus for Start/Stop/dir/speed and use the Micro850 as master.
I stumbled upon a RSLOGIX 500 Modbus RTU sample program for MicroLogix controllers at ABB´s web page. CCW has a converter for .slc to .ccw. How well that works, I have no idea.
I haven't used ABB´s products yet, I have used Yaskawa VFDs before and it is probably simmilar-ish, but I just wanted to check out the sample program.
if there is someone kind enough to save the .rss in .slc for me, it would be much appreciated.