PLCS.net - Interactive Q & A

PLCS.net - Interactive Q & A (http://www.plctalk.net/qanda/index.php)
-   LIVE PLC Questions And Answers (http://www.plctalk.net/qanda/forumdisplay.php?f=2)
-   -   IDEC PFA-1A51 Cable pin out (http://www.plctalk.net/qanda/showthread.php?t=84266)

Charlie Barton December 17th, 2013 07:11 AM

IDEC PFA-1A51 Cable pin out
 
Does anyone have a pinout for a IDEC PFA-1A51 cable or know where I can get one? This is used for the FA-2Junior plc programming.:beerchug:

jrwb4gbm December 17th, 2013 11:13 AM

Is that the cable from the link adapter to the plc? If it is, I have a cable that I can trace the pinouts for you. Let me know.

Charlie Barton December 17th, 2013 02:11 PM

Yes it is and I thank you

jrwb4gbm December 17th, 2013 03:28 PM

PFA-1A51 cable sketch
 
1 Attachment(s)
It is a pin for pin connection on the wide side of the connector and the outside two pins on the short side of the connector. The center two pins are swapped on the short side of the connector. See attached sketch. The connectors have the part number P8 J008 on them. I "think" this part number will substitute: FCN-363J008 by Fujitsu. the part number could be 361, 362, 363, or 364 for the prefix.
Here is a link that might help:
http://www.mouser.com/catalog/specsh...-360series.pdf

PS. If you need info on building the link adapter let me know. I can trace my link adapter circuit if needed.
Also, see this thread for a similar interface or link adapter.
http://www.plctalk.net/qanda/showthr...ighlight=ex100

Charlie Barton December 18th, 2013 07:12 AM

PFA-1A51 pinout
 
Thank you. That's exactly what I needed.:beerchug:

abdelrhman farghal October 26th, 2014 04:00 AM

abdelrhman.farghal@gmail.com
 
please ineed awindldr for fa-2j plc

montagna740 August 12th, 2017 10:56 AM

Hello
I am interested in the cable that goes from the PLC FA-2J to the PF2-CLA link. I understant it is a PFA-1A51. Do you know about its pins, how many are they and what are they for... and how this cable could be replaced. Thanks

jrwb4gbm August 12th, 2017 12:20 PM

Quote:

Originally Posted by montagna740 (Post 748075)
Hello
I am interested in the cable that goes from the PLC FA-2J to the PF2-CLA link. I understant it is a PFA-1A51. Do you know about its pins, how many are they and what are they for... and how this cable could be replaced. Thanks

Is there not enough info in post #4? If not please ask again in more detail as to what you need. I think that I can find the old cable around here somewhere and will be glad to help any way I can. Thanks.


All times are GMT -5. The time now is 04:37 AM.

.