- Interactive Q & A - Interactive Q & A (
-   LIVE PLC Questions And Answers (
-   -   Panelmate Power Pro.- Report for migration (

Jorge Hurtado June 17th, 2016 09:34 AM

Panelmate Power Pro.- Report for migration
1 Attachment(s)
Good morning:

I need to migrate/convert an application (6 Kb size) from Panelmate Power Pro 1775T PMPS 1700 to a PanelView. I have the current file application (pps extensión... Find it attached to this message) but I don't have the Panel Mate Power Pro Configuration Software. ¿May someboty print a "detailed" report useful to migrate/convert the application? Please send a quotation.

Thank you!

Steve Bailey June 17th, 2016 10:53 AM

Panelmate report
1 Attachment(s)
Here it is.

Jorge Hurtado June 17th, 2016 08:16 PM

Thank You very much!

Jorge Hurtado June 12th, 2017 08:12 AM

Panelmate Configuration Report
1 Attachment(s)
Good morning Steve:

I need other Panelmate configuration report, May print it for me? Please find the attached application file... (Should I initiate a new thread on the fórum or may I follow in this one?)

Thank you!

Steve Bailey June 12th, 2017 10:05 AM

1 Attachment(s)
Here you go.

Jorge Hurtado June 12th, 2017 05:21 PM

Thank You very much again!

j_rivera_2 January 2nd, 2018 04:48 PM

1 Attachment(s)
Dear Steve could be possible to made the same for me?
To print a detailed report to made a migration of a panel mate power pro 1700
Thanks a lot in advance

Steve Bailey January 2nd, 2018 05:47 PM

2 Attachment(s)
Here it is. Split into two files due to site limits.

A_G January 3rd, 2018 06:31 AM

Steve Bailey, how do you generate these reports? I've never seen this before, it may be helpful to me in the future

Steve Bailey January 3rd, 2018 06:36 AM

I used the PanelMate PowerPro software. There is a "Print" option under the "Files" menu. I select all pages and all options.

j_rivera_2 January 24th, 2018 04:59 PM

Thank you very much Steve !!!

ccastano July 13th, 2018 11:07 AM

Help Panelmate Pro
1 Attachment(s)
I'm running into the same issue as Jorge and j_rivera.

Steve, I wonder if you could help me too.

Thank you in adavance.

Steve Bailey July 14th, 2018 08:37 AM

1 Attachment(s)
Here it is.

ccastano July 16th, 2018 08:49 AM

Thanks a lot Steve!!!

All times are GMT -5. The time now is 04:53 AM.