View Single Post
Old November 4th, 2009, 07:19 AM   #5

MadPLC is offline
MadPLC's Avatar
Join Date: Nov 2009
Location: Delta, BC
Posts: 47
Well I was able to control the drive with a message command from the PLC. You have to set up a message block to read and write. All I am waiting for now is word back from ABB if the drive can acept a permanent TCP connection. The message block is an open and close type connection whereas the I/O scanning of the Quantum needs a permanent open connection. I don't know if the drive supports that and if it does how do I set it up.
Programming PLC's and HMI's since I started.
  Reply With Quote