View Single Post
Old November 15th, 2009, 06:33 AM   #6

iknowsomeplc is offline
iknowsomeplc's Avatar
Join Date: Apr 2002
Location: Dubai
Posts: 193
If ABB drive supports Modbus TCP, it can act as Modbus slave and Quantum PLC can use I/O Scan to control the drive.
I guess, you must have done the I/O Scanning configuration under the ethernet link ( either base CPU module or NOE module ) in Quantum. Remember that all modicon addressing starts with 1 ( and not 0 ) and hence there may be an offset of 1 in your register addressing.

Say it Simple !!!
  Reply With Quote