PLCS.net - Interactive Q & A - View Single Post

jthornton · July 27th, 2002, 06:52 AM

I should have explained more... When the machine is in manual it is in single step mode. Each press of the start button will cycle the machine one step. When it is in manual it has to not be in the run mode.

Thanks

July 27th, 2002, 06:52 AM	#4
jthornton Member Join Date: Jul 2002 Location: Poplar Bluff, MO Posts: 247	I should have explained more... When the machine is in manual it is in single step mode. Each press of the start button will cycle the machine one step. When it is in manual it has to not be in the run mode. Thanks