Thread: how to check mA
View Single Post
Old January 2nd, 2018, 10:47 AM   #1
United States

Ne_plc_newbie is offline
Join Date: Oct 2017
Location: Nebraska
Posts: 3
how to check mA

I have a senor wired in one wire goes to my 24volts and the other wire goes into a terminal that has a wire coming out from the other side connecting it into a PLC Analog card and In my programming we cant get it to read accurately for temperature so they want me to check the mA but I am not sure how? do I put the black lead of my meter on the 24v and take out the wire from my sensor going into the terminal and put my red lead from my meter on that and have it switched to mA?
  Reply With Quote