View Single Post
Old January 3rd, 2018, 02:59 AM   #1
rejoe.koshy
Member
India

rejoe.koshy is offline
 
Join Date: Dec 2011
Location: kolkata
Posts: 135
Issue with micrlogix 1400

Hey guys,
I am facing a weird issue with a micrologix 1400 series PLC installed in my facility.The IP address of the controller is set to default abruptly & as a result its communication with HMIs collapses.The PLC which is otherwise healthy runs for few weeks before IP settings are wiped out & I have to reenter the address for it to work..

What could be the issue? Could this be a hardware fault?
  Reply With Quote